• Home
  • About Us
  • Contact Us
  • Privacy Policy
  • Terms of Use
Scroll down to content
Carlsbad Plumber
contractor providing quality services to residential and commercial customers
RSS
Menu
  • Home
  • Blog
  • Plumber
  • Tips
  • About Us
  • Contact Us
Scroll down to content
  • fogne-roma

    Rome sewer emergency: prevent damage caused by heavy rains

  • maxresdefault (3)

    Clogged floor trap: what to do?

  • 37847342_1552947259517094_r

    Cellar flooding: who to call to Rome?

  • maxresdefault (2)

    How to change old and worn hoses

  • maxresdefault

    What to do when the dishwasher is not draining water

fogne-roma
September 4, 2019

Rome sewer emergency: prevent damage caused by heavy rains

Alvin Ray / Blog, Plumber, Tips /

Now it’s a show that repeats itself: when the rain falls a bit ‘abundant on Rome, the city of floods! But why is the Eternal City the victim of so many floods? Let’s see what happens in Rome when it rains and what is the state of health of the Roman sewers.

What happens in Rome when it rains
Every time the rain arrives in the Capitoline city, it is an emergency . More and more often in the presence of bad weather, the civil protection is forced to issue the weather alert and implement an emergency flooding plan for the city of Rome to deal with the damage caused by excessive rainfall. The scenario repeats itself: flooded meter, flooded roads, jumped manholes, fallen trees that obstruct the drains, asphalt that yields, with very great inconveniences for the inhabitants of the Capital forced to resort to emergency flooding. But what are the causes of this disaster that is repeated at every storm?

One of the main problems is the poor condition of the Roman sewerage system.

What is the state of health of Rome’s public sewers?
The sewers of Rome are among the oldest in the world and are still functioning. Starting from the Cloaca Maxima, the sewers of Rome have grown more and more, but not enough to serve a city of over six million inhabitants and in continuous expansion. If the Roman sewers were works of hydraulic engineering, the most recent features are not exactly masterpieces, and in any case from the early 2000s no new sections were made . Maintenance is not ideal, and often the cleaning of drains and channels is not carried out. Another problem is that a not inconsiderable number of houses, even quite central, are not connected to the city sewer system, because they were built in a period in which the connection was not required by law.

Rome floods: how to prevent them in case of heavy rains
How to prevent rain damage? Keeping the sewage pipes of the house and the condominium clean is the first basic rule.

When flooding occurs in Rome, the main cause is sewage reflux. This happens because of the obstructed wells and canals , because of the sewers they are undersized or because of traffic jams due to the failure to clean the condominium sewers. If in the first two cases the Municipality should intervene, in the case of condominium sewers it is advisable to carry out a periodic cleaning that frees the channels and does not cause the sewage to rise due to an excess of white waste water.

What to do in case of emergency Rome sewers
In the event that cleaning and maintenance of the sewers is not enough to prevent flooding caused by excessive rains, then it will be necessary to contact a self-cleaning service in Rome.

maxresdefault (3)
September 4, 2019

Clogged floor trap: what to do?

Alvin Ray / Blog, Plumber, Tips /

Usually the signal is the bad smell in the bathroom . When this occurs, the cause is probably a blocked siphon . But even if the cleaning of the siphons is not enough, then the problem could be the well on the floor.

The cockpit is generally located near the sink, and is easily identifiable as it is covered by a metal plate. Unclogging the bathroom cockpit is a fairly simple operation, which you can do on your own, unless your cockpit has been placed under the tiles. In that case, having to break, better to rely on a professional plumber and plumber near me to minimize the inconvenience. Here are some tips to remove a DIY obstruction.

Additional details can be seen at https://acplumbingconstructioninc.com

Floor trap: what it is and why it is blocked
The siphoned cockpit , also known as a floor trap or inspection pit, is a hydraulic element to which the various elements of the bathroom are connected (sink, shower or tub and bidet) and serves to prevent the release of unpleasant odors from these elements or from the main column. It is placed under the floor and covered by a stopper. Above it is a metal plate fixed with a screw.

The floor well is blocked when it is filled with residues from sanitary ware: hair, soap residue, limestone. When these deposits do not obstruct the siphons of the individual bathroom fixtures, they end up in the cockpit. If odors occur in the bathroom, it could be that one of the siphons is plugged. In that case it will be enough to take it apart and clean it from the traffic jam. But if the stink does not disappear, or you notice water around the clay pigeon, then it could be the well to be obstructed. In fact, if the cockpit becomes completely clogged, water and debris will escape, flooding the bathroom and causing damage to the downstairs neighbor.

How to clean the cockpit in the bathroom
If the siphoned cockpit is visible, then you can follow this simple procedure that I am going to explain to you to try to clean it up and make the bad smells disappear. First of all, get gloves and the floor with rags or newspapers. Take a screwdriver to unscrew the screw that holds the metal plate (flat or star depending on the case). Once the plate is removed, you will find the cap of the bathroom cockpit: if you just turn the butterfly in plastic; if it is an old cork it will be necessary to unscrew it with some foresight. Once the cap is removed, you should be in front of the cause of the traffic jam. At this point, it will be enough to remove the material that clogs it, clean the bathroom well with very hot water, refit the cap and then screw the plate again.

And if you can’t see the siphoned cockpit?
In recent years, the wells are no longer visible but covered by tiles, a fact that can create problems if the cockpit gets clogged. a plumber who, thanks to metal detectors or other tools of the trade, will be able to identify the exact spot where the siphon is located and minimize breakage.

37847342_1552947259517094_r
September 4, 2019

Cellar flooding: who to call to Rome?

Alvin Ray / Blog, Plumber, Tips /

Unfortunately when it rains in the capital, the Rome flood emergency starts immediately . Not only roads but also cellars are flooding ! What to do if your winery in Rome is flooded?

the phenomenon of flooding in Rome is becoming more and more frequent. The causes are many and are not easy to solve. It would take a lot of money to solve the problem among sewers under tension and manholes blocked due to poor maintenance. But it is not just flooded roads, fallen trees, craters in asphalt and closed metro stations that create inconvenience. If the water enters your basement, then you need to empty it and clean it up immediately: here’s how.

What causes the cellars to flood?
The flooding of the cellar can have several causes. In some cases it could be the obstruction of the sewer: this happens due to the lack of periodic self- purging, or due to natural disasters that cause an anomalous filling of the sewer with leaves, twigs, etc. In other cases it could be the rupture of pipes present in the cellar or in the basement. The other main cause of flooding of the cellars, especially at street level or semi-buried, is the abundant rains , which can discharge such a quantity of water that they cannot be absorbed by the manholes and sewers.

In Rome these situations are unfortunately very common as not only do heavy rains fall during the winter, but the sewers are not enough for the ever increasing number of inhabitants in the Capital and their maintenance is not exactly optimal. But what can be done to limit the damage in case of cellar flooding in Rome?

Cellar flooded: what to do immediately to contain the damage
If your cellar is flooded, the key thing is to try to remove the water as soon as possible. If the water stagnates, the damage will always be greater as it will create infiltrations in the walls and floors that are very expensive to repair. So if the amount of water is minimal, you can try draining it with an immersion pump that can be found in a hardware store. Once the water has been removed, the room must be ventilatedso you can let the remaining moisture dry. In any case, it is always advisable to have an expert made an inspection to assess the damage and possibly proceed with a claim for compensation if the cause of the flooding depends on the leak of the municipal sewer, or you are in possession of an insurance.

But if the water is excessive then you must immediately call the emergency flooding so that it can intervene with professional means that guarantee the complete drying of the cellar. In addition to disposing of the water, the hydraulic emergency service will evaluate any other damage and can promptly intervene to avoid further problems.

maxresdefault (2)
September 4, 2019

How to change old and worn hoses

Alvin Ray / Blog, Plumber, Tips /

Do you know the pipes that connect the sanitary ware to the wall ? The hoses wear out over time and if you notice small water leaks at one of these, then maybe it’s time to replace it! Don’t worry: changing a bathroom hose is a very simple operation.

Now I’ll explain how to change old and worn hoses with a few do-it-yourself operations.

What are hoses
The hoses are of plastic tubes covered with steel mesh which, as the name implies, can bend and curve as made of material adaptable to various forms. The hoses connect the toilet, but also the sink and the bidet, to the wall where they are screwed with threads. They allow the water flow rate. They are very resistant, but in the long run they wear out and give rise to leaks. In the most serious cases they can also burst , causing real flooding.

Duration of a hydraulic hose
The flexible hydraulic hoses, in addition to being resistant and elastic, are also equipped with rubber seals and the threads have teflon tape that waterproofs them. But the pressure and the contact with the water itself consume all the pieces of the hose. Generally how long a hose lasts depends on the use of those sanitary ware, but it is advisable to consider replacing them after five / six years.

How to replace the DIY hose
Replacing a flexible is a really simple operation, which does not require excessive effort, just a little familiarity with pipes and washers. First you need to close the general water tap , then paper the area under the hose with newspapers or rags to collect the water that may remain in the pipe. Then, with a parrot wrench, unscrew the hose from both ends. If you do not know how to unscrew an oxidized hose because it does not come off, try a lubricant to facilitate the unscrewing of the washers.

Now the new pipe must be installed: the pipes are available in any hardware store. The important thing is that you bought a new tube of the same length and with the same diameter threads. To mount the new hose, first put some Teflon tape on the two taps, then tighten the hose and position it as straight as possible. Insert the screws and turn, without too much force, with the parrot wrench. Then reopen the water and check that there are no more leaks.

In the event of a hose bursting suddenly, then it will be better to call the hydraulic emergency service immediately , and in the meantime close the water and collect the spilled liquid with rags.

maxresdefault
September 4, 2019

What to do when the dishwasher is not draining water

Alvin Ray / Blog, Plumber, Tips /

If the dishwasher does not drain the water, the causes can be different: encrustations, food residues and grease are the main cause. But it could also be an anomaly that the hydraulic emergency Rome and provincewill it be able to restore? How can I tell if the dishwasher does not drain the water?

It is possible to understand that the dishwasher does not drain the water at the end of the wash cycle, because a stagnation forms on the bottom of the appliance. In some cases, on the other hand, there may be a leakage of water from the dishwasher that will end up on the floor, creating a lot of inconvenience. of a light on the display. If you want to know why your dishwasher does not drain the water, you can always contact the Rome plumber for a quick and decisive operation. The local plumber is in fact always ready to intervene to adjust the machine.

What you can do in the meantime is to make sure the filter is clean, because it is often a drainage tube obstruction. The clogged drain pipe does not allow the water to flow correctly, so it is always to be checked. You can do this yourself, getting yourself a bucket and disconnecting the end of the tube under the kitchen sink. Once this is done, you can try to start a wash.

If even in this way, the dishwasher does not drain properly, then there is something that clogs the duct. Or the tube could be bent, so it hinders the normal flow of water. Even the drain pump, damaged or blocked, could be the cause of the malfunction. Even in these cases, it is necessary to dismantle it and check the operation of the fan. In this way it is possible to establish whether it has suffered a breakdown or not. If the drain pump is operated by a belt, it is necessary to check that it is perfectly intact, because it could also have slipped off the guide.

Once the filter, hose and drain pump have been checked, then it is time to check that the dishwasher is correctly fed. In this case it is best to leave it to the professional plumber, who will check, using a tester, if the 220 V current reaches, or not, the contacts of the board. Do you want to get the best out of your dishwasher? Once the filter, hose and drain pump have been checked, then it is time to check that the dishwasher is correctly fed. In this case it is best to leave it to the professional plumber, who will check, using a tester, if the 220 V current reaches, or not, the contacts of the board.

Do you want to get the best out of your dishwasher? Once the filter, hose and drain pump have been checked, then it is time to check that the dishwasher is correctly fed. In this case it is best to leave it to the professional plumber, who will check, using a tester, if the 220 V current reaches, or not, the contacts of the board. Do you want to get the best out of your dishwasher?

To get the best out of your dishwasher, it’s always good to make sure that the machine always works at maximum efficiency. But in fact underestimate the factors that determine its efficiency: load mode, type of washing, maintenance and detergent used.

The dishwasher is a precious appliance, so it is good to take care of it in all respects. Instead of wasting time with the pre-wash, we try to put the dishes cleaned of food residues in the dishwasher. The load must be done starting from the lower basket by placing the larger plates towards the bottom of the machine.

Another care concerns the washing: a high temperature cycle is used to wash trays or other particularly greasy utensils; for glasses, it is better to choose a more delicate wash. The dishwasher pad should only be inserted at the end, before closing the machine and operating it. Servicing the dishwasher once a month, you need to use a specific dishwasher detergent, so that this always guarantees optimal performance.

About Me

I arrive with all the tools to work in the minimum time restoring the damage by offering the maximum result.

Advertisement

Twitter Feed

Tweets by _lifeinsurance

Recent Posts

  • Rome sewer emergency: prevent damage caused by heavy rains
  • Clogged floor trap: what to do?
  • Cellar flooding: who to call to Rome?
  • How to change old and worn hoses
  • What to do when the dishwasher is not draining water

Advertisement

Categories

  • Blog
  • Plumber
  • Tips
  • fogne-roma

    Rome sewer emergency: prevent damage caused by heavy rains

  • maxresdefault (3)

    Clogged floor trap: what to do?

  • 37847342_1552947259517094_r

    Cellar flooding: who to call to Rome?

  • maxresdefault (2)

    How to change old and worn hoses

  • maxresdefault

    What to do when the dishwasher is not draining water

↑

  • Home
  • About Us
  • Contact Us
  • Privacy Policy
  • Terms of Use
© Carlsbad Plumber 2021